John Deere HR-2410GH - Manual (Page 3)

Operator's Manual 3
intRoduCtion
Congratulations on the purchase of your John Deere pressure washer! You can be assured your John Deere pressure
washer was constructed with the highest level of precision and accuracy. Each component has been rigorously tested
by technicians to ensure the quality, endurance and performance of this unit.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from your
John Deere pressure washer. The contents of this manual are based on the latest product information available at the
time of publication. John Deere reserves the right to make changes in price, color, materials, equipment, specifications
or models at any time without notice.
! imPoRtant !
these paragraphs are surrounded by a "safety aleRt boX". this box is used to designate and
emphasize safety Warnings that must be followed when operating this pressure washer.
accompanying the safety Warnings are "signal words" which designate the degree or level
of hazard seriousness. the "signal words" used in this manual are as follows:
DANGER: indicates an imminently hazardous situation which, if not avoided, Will
result in death or serious injury.
WARNING: indicates a potentially hazardous situation which, if not avoided, Could
result in death or serious injury.
CAUTION: indicates a potentially hazardous situation which, if not avoided may
result in minor or moderate injury.
the symbols set to the left of this paragraph are "safety alert symbols". these symbols
are used to call attention to items or procedures that could be dangerous to you or other
persons using this equipment.
alWays PRoVide a CoPy of tHis manual to anyone usinG tHis eQuiPment. Read
all instRuCtions befoRe oPeRatinG tHis PRessuRe WasHeR and esPeCially
Point out tHe "safety WaRninGs" to PReVent tHe Possibility of PeRsonal
inJuRy to tHe oPeRatoR.
Once the unit has been uncrated, write in the serial number of your unit in the space provided below.
seRial numbeR_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced an that the mechanical and electrical problems are
corrected prior to operation of the unit. If you require service, contact your Customer Service.
Mi-T-M ® Corporation, 8650 Enterprise Drive, Peosta, IA 5068
-877-JD-KLEEN / (-877-535-5336) Fax 563-556-35
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
. Model Number
. Serial Number
3. Date and Place of Purchase