JVC GD-42X1E - Manual (Page 76)

iv
Do not carry the product on your own!
● In order to prevent accidents, ensure that the product is carried by two
or more people.
On disposal of the product!
● Follow the instruction in “Information for Users on Disposal of Old
Equipment and Batteries”. (➔ page v)
■ Registered trademarks, the model name, and power rating are written
on the labels placed under the terminal cover on the rear of the product.
■ For more details on installation, usage and safety, consult your retailer.
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-in fuse. When
replacing the fuse, be sure to use only a correctly rated approved type,
re-fit the fuse cover. (Consult your dealer or qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade
screwdriver, and replace the fuse.
For UK only:
If you accidentally cut the power cord
Attach a new plug following the steps below. If in doubt, contact your
local retailer.
Important
● Never connect to the larger terminal marked with an “E”, the safety
earth symbol “ ” or coloured green or green-and-yellow.
● The wires in the mains lead on this product are coloured with the
following code:
● Blue: Neutral wire (connect to the black terminal, or one marked “N”)
● Brown: Live wire (connect to the red terminal, or one marked “L”)
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Fuse