JVC GD-42X1E - Manual (Page 128)

38
External Control
You can control GD-42X1E from external control equipment (a personal
computer or a dedicated controller) via the RS-232C terminal on the rear of
the monitor.
Communication specifications
Cable
A crossover cable with a RS-232C connector
Communication specifications
● Baud Rate: 19200 bps
● Data Bits: 8 bits
● Parity: Odd parity
● Stop Bits: 1 bit
● Flow Control: No control
● Communication Code: ASCII Code
Terminal specifications
This is a male
terminal.
Pin No. Signal
1 —
2 RXD
3 TXD
4 —
5 GND
6 —
7 —
8 —
9 —