JVC HR-J239EE - Manual (Page 18)

18
EN
TIMER RECORDING
Timer
Programming
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button.(
੬
pg. 22)
Remember, the clock must be set before you can
programme the timer (
੬
pg. 9).
1 2
4 5
3
6
8
0
7 9
2 2
q 5 / 8
OK
PROG.
SP/LP/EP
AUTO SP/LP indicator
DAILY
TIMER
WEEKLY
TV PROG.
CANCEL
NUMBER
AUTO SP/LP TIMER
ACCESS MODE SELECT
SCREEN
1
Press PROG.
ACCESS TIMER PROGRAM-
MING SCREEN
2
Press TV PROG. 5/∞ to
place the pointer next to
"TIMER PROGRAM-
MING", then press OK on
the remote control.
ENTER PROGRAMME
START TIME
3
Press NUMBER key "1( 5)"
or "4( ∞)" to enter the time
you want recording to
start.
● Press and hold either
button to delay or
advance the time by 30
minutes.
● If the Programme is already used, press PROG. until a
vacant Programming screen appears.
ENTER PROGRAMME STOP
TIME
4
Press NUMBER key "2( 5)"
or "5( ∞)" to enter the time
you want recording to
stop.
● Press and hold either
button to delay or
advance the time by 30
minutes.
ENTER PROGRAMME DATE
5
Press NUMBER key "3( 5)" or "6(∞)" to enter the date.
TIMER PROGRAMMING
CLOCK SET
[TV PROG 5∞] =
[CANCEL] :EXIT
– P1–
START STOP
21:00 = – –:– –
SP
DATE TV PROG.
25.12 – –
[1–6] [TV PROG 5∞]
[PROG./CLOCK] :NEXT
– P1–
START STOP
21:00 = 22:00
SP
DATE TV PROG.
25.12 – –
[1–6] [TV PROG 5∞]
[PROG./CLOCK] :NEXT