Turn on the recorder, Access channel set mode select screen, Select mode – JVC HR-J239EE User Manual
Page 8: Select channel, Perform tuning, Return to normal screen
8
EN
INITIAL SETTINGS (cont.)
Fine-Tuning Channels
Already Stored
TURN ON THE RECORDER
1
Press OPERATE.
ACCESS CHANNEL SET
MODE SELECT SCREEN
2
Press and hold CH SET for more than 2 seconds. The
Channel Set Mode Select screen appears.
SELECT MODE
3
Press TV PROG.
5/∞ to place the pointer next to "FINE
TUNING", then press OK.
SELECT CHANNEL
4
Press TV PROG.
5/∞ so
that the position number of
the channel you want to
fine-tune appears, then
press OK.
PERFORM TUNING
5
Press TV PROG.
5/∞ until
the picture becomes
clearer, then press STORE.
● To fine-tune another
channel, press OK and
repeat steps 4 – 5.
RETURN TO NORMAL
SCREEN
6
Press CH SET.
TV PROG. 1
[STORE] :STORE
[TV PROG
5] :FINE TUNING +
[TV PROG
∞] :FINE TUNING –
[CH SET] :EXIT
1
2
4
5
3
6
8
0
7
9
2
2
q
5
/
8
OPERATE
OPERATE
OK
TV PROG.
CH SET
TV PROG.
OK
SELECT NUMBER
TV PROG. 1
[TV PROG
5∞] =
[CH SET] :EXIT
STORE