JVC AV-16N311 - Manual (Page 19)

19
Using the TV’s menus
VIDEO SETTING
You can set PICTURE MODE, VNR and
PICTURE EFFECT functions for VIDEO
mode using VIDEO SETTING menu.
1 Press MENU T to display the
“MENU 6” menu, then select
“VIDEO SETTING”.
MENU 6
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR 1
AI ECO DISPLAY ON
SELECT BY EXIT BY
OPERATE BY -+ DISPLAY
2 Press CHANNEL –/+ or MENU / .
The sub-menu is displayed.
VIDEO STATUS : VIDEO-1
PICTURE MODE : STANDARD
VNR : ON
PICTURE EFFECT : ON
RESET BY 0
SELECT BY EXIT BY
OPERATE BY -+ DISPLAY
3 Press CHANNEL –/+ or MENU /
to select “VIDEO-1”, “VIDEO-2”
or “VIDEO-3”.
4 Press MENU T to select
“PICTURE MODE”, then press
CHANNEL –/+ or MENU
/ to
select the picture mode of
“BRIGHT”, “STANDARD”
or “SOFT”.
5 Press MENU T to select “VNR”,
then press CHANNEL –/+ or
MENU
/ to select VNR “ON”
or “OFF”.
6 Press MENU T to select
“PICTURE EFFECT”, then press
CHANNEL –/+ or MENU
/ to
select PICTURE EFFECT “ON”
or“OFF”.
• PICTURE MODE and VNR settings are
changed only when VIDEO input mode
is selected while PICTURE EFFECT is
ON. Otherwise, PICTURE MODE and
VNR are not changed.
• Press 0 button to reset the setting.
AI ECO SENSOR
You can enable this function so that the
brightness of TV screen is automatically
adjusted according to the brightness of
your room.
1 Press MENU T to display the
“MENU 6” menu, then select
“AI ECO SENSOR”.
MENU 6
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR 1
AI ECO DISPLAY ON
SELECT BY EXIT BY
OPERATE BY -+ DISPLAY
2 Press CHANNEL –/+ or MENU /
to select “OFF”, “1” or “2”.
• For detailed description, see the
“ECO SENSOR button” on page 9.
AI ECO DISPLAY
You can display on the screen the effect
of the AI ECO SENSOR function.
1 Press MENU T to display the
“MENU 6” menu, then select
“AI ECO DISPLAY”.
MENU 6
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR 1
AI ECO DISPLAY ON
SELECT BY EXIT BY
OPERATE BY -+ DISPLAY
2 Press CHANNEL –/+ or MENU /
to select “ON”.
The clover mark indicating the
brightness of your room is displayed
for several seconds each time the
brightness changes. The number of
clover marks displayed on screen
increases as your room becomes
darker.
To cancel the AI ECO DISPLAY
function, select “OFF”.
GGT0016-29V331-E401 22/08/2003, 15:38pm 19