JVC AV-16N311 - Manual (Page 6)

6
Preparation
6 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo
is displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the “MENU 3” menu. For details, see page 15.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
SETUP TOUR
2 Press the CHANNEL –/+ or
the MENU / buttons to
select the on-screen
language.
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
EXIT BY
OPERATE BY -+ DISPLAY
3 The AUTO PROGRAMMING
function will start and the
indicator blinks.
STOP BY -+
SETUP TOUR
NOW PROGRAMMING
• To stop the AUTO PROGRAMMING
function, press the CHANNEL m or
the MENU / buttons.
When all the TV channels that can
be received on your TV have been
preset, the display goes out and
the AUTO PROGRAMMING
function operation is completed.
• If a TV channel you want to view is
not set to the channel, set it with the
MANUAL CH PRESET function.
For details, see page 16.
4 Upon the completion of
AUTO PROGRAMMING
function, the message below
is displayed.
SETUP TOUR
THANK YOU!
OFF
TIMER
ECO
SENSOR
SYSTEM
COLOUR SOUND
CINEMA
SURROUND
MENU
DISPLAY
TV/VIDEO
1 2 3
DISPLAY
button
MENU t
buttons MENU
buttons
CHANNEL –/+
buttons
PICTURE
MODE
CHANNEL
SCAN
CHANNEL
RETURN+
VOLUME
4 5 6
7 8 9
0 -/--
/
POWER lamp Main power button
GGT0016-29V331-E401 22/08/2003, 15:38pm 6