JVC HD-52G657 - Manual (Page 63)

63
Button Functions
The R ETURN +/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the R ETURN +/TV and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the C HANNEL +/– buttons.
Press the R ETURN +/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the R ETURN + button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Return +/TV
RETURN CHANNEL
PROGRAMMED!
By pressing the S OUND button, you can change the A.H.S.+ (Advanced Hyper Surround plus)
mode, A.T.C. (Advanced Tone Correction), SMART SOUND and HYPER BASS on or off.
A.H.S.+ - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
A.T.C. - Reproduces distinctive sounds with tone correction.
SMART SOUND - Decreases high sound levels, giving a regulated sound level.
HYPER BASS - Increases bass levels, giving a richer, deeper bass.
Press the S OUND button
π† To select A.H.S.+, A.T.C., SMART SOUND or
HYPER BASS
è To choose the setting
Press the M ENU when finished
Sound
SOUND EFFECT
SELECT OPERATE EXIT MENU
A.H.S.+
A.T.C.
SMART SOUND
HYPER BASS
MOVIE MUSIC OFF
ON OFF
ON OFF
ON OFF
Notes:
• Smart Sound may become an unnatural effect, depending on the signal source.
• You can adjust BALANCE only when A.H.S.+ is off.
LCT2061-001C-A ENG.indd 63 LCT2061-001C-A ENG.indd 63 12/15/06 10:48:30 AM 12/15/06 10:48:30 AM