A pg. 15, For tv operations, For dbs tuner or catv converter operations – JVC SP-THM45C User Manual

Page 18

Advertising
background image

Getting started

15

English

For TV operations

You can operate your TV using the remote control supplied with
this system.
• Refer also to the instruction manuals supplied with your TV.

7 To set the manufacturer’s code

You can operate a JVC TV without setting the remote control
signal.

1

Slide the remote control mode selector
to TV.

2

Press and hold

F TV.

Keep the button pressed until step 4 is finished.

3

Press ENTER.

4

Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).

Examples:
For a Hitachi TV: Press

1, then 0.

For a Toshiba TV:Press

0, then 8.

5

Release

F TV.

6

Try operating your TV by pressing
F TV.

When your TV turns on or off, you have entered the correct
code.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.

NOTE
• Manufacturers’ codes are subject to change without notice. If they are

changed, this remote control cannot operate the equipment.

• Set the codes again after replacing the batteries of the remote control.

7 Operation

IMPORTANT
Before using the remote control to operate a
TV;
• Set the remote control mode selector to

TV.

The following buttons are available:
F TV:

Turns TV on and off.

TV VOL +/–:

Adjusts the volume.

TV/VIDEO:

Selects the input mode (either TV or
VIDEO).

CHANNEL +/–:

Changes the channels.

1-10, 0, +10 (100+): Selects the channel.
TV RETURN:

Alternates between the previously selected
channel and the current channel.

For DBS tuner or CATV converter
operations

You can operate your DBS tuner or CATV converter using the
remote control supplied with this system.
• Refer also to the instruction manuals supplied with your DBS

tuner or CATV converter.

7 To set the manufacturer’s code

1

Slide the remote control mode selector
to VCR/DBS.

2

Press and hold DBS.

Keep the button pressed until step 4 is finished.

3

Press ENTER.

Remote control

mode selector

Number
buttons

(play button)

Manufacturer

Code

Manufacturer

Code

JVC

01

Samsung

12

Hitachi

10

Sanyo

13

Magnavox

02

Sharp

06

Mitsubishi

03

Sony

07

Panasonic

04, 11

Toshiba

08

RCA

05

Zenith

09

TH-M45[A].book Page 15 Thursday, June 5, 2003 11:20 AM

Advertising
This manual is related to the following products: