JVC SP-THM45C - Manual (Page 41)

Advanced operations
38
4
Press Cursor //5 to select the desired
audio language.
Each time you press the button, the audio language changes.
5
Press ENTER.
The pop-up window disappears.
To turn off the on-screen bar
Press
ON SCREEN.
NOTE
• Some audio languages are abbreviated in the pop-up window. See
“The language codes list” ( A pg. 46).
Selecting the audio channel
When you play certain karaoke (Video CD/SVCD),
you can enjoy karaoke by selecting the audio
channel to play.
• The sound of each audio channel depends on the contents of the
disc.
7 During playback
When using the AUDIO button:
1
Press AUDIO.
The following pop-up window appears on the TV screen.
Example: “ST” (stereo) is selected out of 3 audio channels
recorded.
2
Press AUDIO repeatedly to select the
desired audio channel.
Each time you press the button, the audio channel changes.
Example for Video CD:
] ST ] L ] R ] (back to the beginning)
• ST: To listen to normal stereo playback.
• L: To listen to L (left) audio channel only.
• R: To listen to R (right) audio channel only.
Example for SVCD:
] ST 1 ] ST 2 ] L 1 ] R 1 ] L 2 ] R 2 ] (back to
the beginning)
• ST 1/ST 2:
To listen to normal stereo playback of ST 1 or 2 channel.
• L 1/L 2:
To listen to L (left) 1 or 2 audio channel.
• R 1/R 2:
To listen to R (right) 1 or 2 audio channel.
The pop-up window disappears if no operation is done for
about 5 seconds.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to move
H
to .
3
Press ENTER.
The following pop-up window appears under the selected item.
Example: “ST” (stereo) is selected out of 3 audio channels
recorded.
4
Press Cursor //5 to select the desired
audio channel(s).
Each time you press the button, the audio channel changes.
5
Press ENTER.
The pop-up window disappears.
To turn off the on-screen bar
Press
ON SCREEN.
TH-M45[A].book Page 38 Thursday, June 5, 2003 11:20 AM