JVC HR-J647MS - Manual (Page 14)

14
EN
PLAYBACK (cont.)
Tape Position Indicator
The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of “5” in
relation to “0” (beginning) or
“+” (end) shows you where you
are on the tape.
”O.S.D.” (
੬
pg. 9) must be
set to “ON”, or the indicator
will not appear.
NOTE:
Depending on the type of tape used, there may be times when
the indication is not correct.
3
1:23:45
0 + + +
Beginning End
¶
1
4 ¢
7
3
8
¡
1 2 3
4 5 6
7 8
0
9
2
4
1
3
FF
REW
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO MONITOR on the recorder (or /on the remote control) changes the soundtrack being played back as
follows:
TRACK
Recorder's Front Panel On-Screen Display
USE
L + R HI FI For Hi-Fi stereo tapes
L R
L HI FI For main audio of Bilingual tapes
L
R HI FI For sub audio of Bilingual tapes
R
NORM NORM For audio-dubbed tapes
L + R + NORM HI FI For audio-dubbed tapes
NORM
NOTES:
● "L + R" should normally be selected. In
this mode, Hi-Fi stereo tapes are
played back in stereo, and the NORM
track is played back automatically for
tapes with only normal audio.
● For instructions on recording stereo
and bilingual programmes, refer to
page 17.
● "O.S.D." must be set to "ON" or the
on-screen displays will not appear
(
੬
pg. 9).
AUDIO MONITOR