JVC GC-S5 - Manual (Page 57)

57
BASIC
PHOTOGRAPHY
3 Use the [ 3 ] or [ 4 ] button to
select the image to be erased
and press the [MENU/EXE]
button.
• The confirmation screen appears.
• In step 1, press the [DISP] button to
select the image to be erased in the
same way as in 9-shot multi-frame
playback (aP.29, 53).
4 Press the [MENU/EXE]
button.
• The image is erased and the menu
screen reappears.
! CAUTIONS
• If “ @ PROTECTED FRAME” is displayed, the image cannot be erased.
- To remove the protection on that image: Switch to Protect mode (aP.76) to remove
the protection.
- To erase other images: In Playback mode (aP.42), select the images to be erased
and then go back into Erase mode to erase the frames.
∗
Note that using any buttons other than the Mode dial when “@PROTECTED FRAME” is
displayed can cause a malfunction.
To Cancel Single-Frame Erase
In step 4, press the [6] button before you press [MENU/EXE] button.
5 To erase another frame,
repeat the procedure from
step 2.
ERASE
<
FRAME
>
D S C 0 0 0 1 0
FRAME
< > <
EXE
>
ERASE
<
FRAME
>
D S C 0 0 0 1 0
OK?
OK
<
EXE
>
CANCEL
< >