JVC AV-36D501 - Manual (Page 24)

On/Off Timer
The On/Off timer lets you program your television
to turn itself on or off. You can use it as an alarm
to wake up, to help you remember important
programs, or as a decoy when you're not home.
P ress the M E N U b u t t o n
To ON/OFF TIMER
To operate (begins with ON TIME)
To set the hour (AM/PM) you want the TV
to turn on
To move to minutes
To set the minutes
To accept ON TIME and move to OFF
TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
To accept OFF TIME and move to
CHANNEL
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES to accept the timer setting,
choose NO if you don't wish to accept
To FINISH
To save settings
24 General Items
ON TIME 7:00 PM
OFF TIME 10:00 PM
CHANNEL 02
MODE ONCE EVERYDAY
ON/OFF TIMER YES NO
FINISH
NOTES:
On/Off Timer cannot be set to locked or guarded channels. In order for the On/Off Timer to work, the clock must be set. After
a power interruption Timer settings must be reset.
D501 Timer Note:
If the television is on when a timed event is about
to start a Timer Preview window will appear. The
Timer Preview window will appear in the lower right
corner of the screen seven seconds before the
timer is programmed to begin. When the timer
activates, the Preview picture will become the main
picture.
Seven seconds before Timer
Activates....
(Preview of ON/OFF Timed
Program)
Timer Activates
Seven seconds later...
33
4
33
Timer
Activated
4