JVC AV-36D501 - Manual (Page 28)

28 Button Functions - PIP
O N /M OVE
Turn PIP on by pressing the O N /M OVE button.
(PIP) O N /M OVE
E XIT to turn PIP off
Once PIP is turned on, you can move the PIP
window to any of the TV’s main picture’s four
corners with the O
N /M OVE button.
O N /M OVE
• Each press of O N /M OVE will shift the PIP window
to a different corner.
F
REEZE
Use the F REEZE button to lock a single, still image
onto the PIP window.
F REEZE
• If PIP is off when F REEZE is pressed, a snapshot
of the main screen is taken and placed in the
PIP window.
• If PIP is on when F REEZE is pressed, the image
in the window when the button was pressed is
held.
S OURCE
You can select the signal source for the PIP
window image.
S OURCE
• If the PIP does not have a signal, the window
will be blue.
• If you connect a DVD to Video-2, the PIP
window will be blue.
C
HANNEL
+/- For PIP
Like the main C HANNEL +/- buttons, C HANNEL +/-
for PIP lets you scan through the channels in the
PIP window.
C HANNEL +/-
• Direct channel selection with the 10 key pad for
PIP is not possible.
S
WAP
You can exchange the channel displayed on the
main screen for the one shown in the PIP window
by pressing S
WAP .
S WAP
02
07
• In order for PIP to work, the television must be set to “TV mode”. If you play a videotape, your TV will switch to “VCR
mode”. The TV only sees one signal in VCR mode. In order to use PIP, press the I NPUT button to return to TV Mode.
• The PIP window is 1 /
9
the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
NOTES:
PIP (Picture-In-Picture)
PIP displays two separate pictures on screen.
Your D-Series television has 2-Tuner PIP, meaning
you can view pictures from two different channels
simultaneously. A special set of PIP control buttons
are located on the upper part of the remote
control. Descriptions of each button appear on this
page.
Note: PIP is available on model D501 Series
sets only.