JVC XL-PG38BP - Manual (Page 12)

8
English
Español
Nederlands
XL-PG38BP / LVT0978-010A [E] / [EN], SP, NL
Program play
You can program up to 20 tracks in any desired order
including the same tracks.
Follow steps 1–5.
In step 1, during playback or in stop mode, press PRO-
GRAM.
a Track number to be programmed
00: Not programmed yet.
b Program sequence number
In step 2, select the desired track.
c e.g. Track number 3
In step 3, register in sequence.
The track is registered, and “00” and the next program
sequence number appear.
In step 4, when you program exceeding 20 tracks, the
program sequence number returns to “01” and will
overwrite the previous setting.
In step 5, the tracks are played in the programmed or-
der, and then the unit stops.
7 To confirm the programmed tracks
In stop mode, press PROGRAM repeatedly. The pro-
grammed track number will successively appear together
with the program sequence number. At this time, you
can change the program, if required.
If the programmed tracks are less than 20, track number
“00” appears for the youngest programmable sequence
number, enabling further programming.
7 To delete the entire programmed sequence
Turn off the unit, or set the track number to 00 for the
first program sequencer number, “01”. Repeat steps 2 and 3 to program all the desired
tracks.
XL-PG38BP_en.p65 3/13/03, 5:55 PM 8