JVC XL-PG38BP - Manual (Page 8)

4
English
Español
Nederlands
XL-PG38BP / LVT0978-010A [E] / [EN], SP, NL
Accidental Operation
Prevention Function
(Hold Mode)
This function causes the unit to ignore short, accidental
button presses.
The accidental operation prevention function
prevents the following:
• Powering on the unit accidentally (which can cause the
batteries to go dead).
• Play being cut off unexpectedly in the middle of a track.
To use the accidental operation prevention
function
• To prevent the unit from powering up accidentally, set
the HOLD switch to the ON position.
• To prevent the unit from unexpected operation during
play, set the HOLD switch to the ON position after you
starts playing the disc.
“ ”
When the unit is in the hold mode according to the HOLD
switch setting in the main unit, “
” lights up if the 6
button is pressed.
To release the function
Move the HOLD switch back to the OFF position.
Note:
If the HOLD switch is set to the ON position, you cannot
turn on the unit.
XL-PG38BP_en.p65 3/13/03, 5:54 PM 4