Jura Capresso IMPRESSA J5 - Manual (Page 49)

49
7 Permanent settings in programming mode
M l Press the Rotary Switch to enter the programme item.
SAVE -
Ä L Turn the Rotary Switch until SAVE √ appears.
M l Press the Rotary Switch to confirm this selection.
OK appears briefly on the display.
ENERGY √
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
If the machine is disconnected from the mains, the time has to be
reset.
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until TIME appears.
M l Press the Rotary Switch to enter the programme item.
--:-- appears on the display.
Ä L Turn the Rotary Switch to set the hour.
M l Press the Rotary Switch to confirm the hour setting.
Ä L Turn the Rotary Switch to set the minutes.
M l Press the Rotary Switch to confirm the minute setting.
OK appears briefly on the display.
TIME
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
The programmable switch-on time is deactivated in the basic set-
ting and can only be set when the time is set.
The programmable switch-on only works when the machine
is switched on at the power switch e (standby).
o
Time Time
Programmable
switch-on time Programmable
switch-on time