JVC 0303-MK-ID-SN User Manual

Page 28

Advertising
background image

EN

28

Fade/Wipe Effects

These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to
the next.
Fade or Wipe works when tape recording is started or
when you stop recording.

1

Set the VIDEO/MEMORY Switch

t

to “VIDEO”,

then set the Power Switch

@

to “

” while pressing

down the Lock Button

$

located on the switch. Open

the LCD monitor fully or pull out the viewfinder fully.

2

Press MENU

4

. The Menu Screen appears.

3

Press + or

5

to select “

(WIPE/FADER)”, then

press SELECT/SET

3

.

4

Press + or

5

to select the desired function, then

press SELECT/SET

3

. Selection is complete. Press

SELECT/SET

3

again.

• The WIPE/FADER Menu disappears and the effect is

reserved. The indicator representing the selected
effect appears.

5

Press the Recording Start/Stop Button

!

to activate

the Fade-in/out or Wipe-in/out.

To Deactivate The Selected Effect . . .

..... select “OFF” in step 4.

IMPORTANT

Some Fade/Wipe Effects cannot be used with certain
modes of Programme AE with special effects
(

pg. 27). If an unusable Fade/Wipe Effect is

selected, its indicator blinks or goes out.

NOTE:

You can extend the length of a Fade or Wipe by pressing
and holding the Recording Start/Stop Button

!

.

FADER — WHITE

Fade in or out with a white screen.

FADER — BLACK

Fade in or out with a black screen.

FADER — B.W

Fade in to a colour screen from a black and white
screen, or fade out from colour to black and white.

WIPE — CORNER

Wipe in on a black screen from the upper right to the
lower left corner, or wipe out from lower left to upper
right, leaving a black screen.

WIPE — WINDOW

The scene starts in the centre of a black screen and
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the centre.

WIPE — SLIDE

Wipe in from right to left, or wipe out from left to right.

WIPE — DOOR

Wipe in as the two halves of a black screen open to the
left and right, revealing the scene, or wipe out and the
black screen reappears from left and right to cover the
scene.

WIPE — SCROLL

The scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
black screen.

WIPE — SHUTTER

Wipe in from the centre of a black screen toward the
top and bottom, or wipe out from the top and bottom
toward the centre leaving a black screen.

FOR RECORDING

5

3

4

t

!

@

$

Advertising
This manual is related to the following products: