Connecting the tv and receiver, Connecting the aerial and vcr – JVC LCT1445-001A User Manual

Page 10

Advertising
background image

Connections

8

PD-42DV2 (ASIA) / LCT1445-001A / English

ENGLISH

Connecting the TV and receiver

Use the supplied system cable to connect the TV to the
receiver.

The two connectors are of different shapes.
Ensure that the pins on connector 1 are oriented correctly,
press the connector into the socket, and tighten the screws at

left and right to lock it in place.
Press connector 2 firmly into place until it is locked.

Disconnecting the system cable
Release connector 1 by unscrewing the screws at left and
right and removing it from the socket.

Release connector 2 by removing it from the socket while
pressing the release bottoms on either side.

Connecting the aerial and VCR

• Aerial cable is not supplied. Use a good quality 75-ohm

coaxial cable.

• Read the manual that came with the VCR before

connecting.

If not connecting a VCR (see fig.A):

Connect an aerial cable to the aerial socket on this

receiver.

If connecting a VCR (see fig.B):
1 Connect the aerial cable to the aerial input

socket on the VCR, and connect the VCR and

receiver with another aerial cable

2 Connect the VCR’s VIDEO OUT (video output)

terminal and the receiver’s VIDEO terminal with

a video cable
To connect a VCR to the receiver with an S-VIDEO
cable:

Connect the VCR’s S-VIDEO OUT (S-VIDEO output)
terminal and receiver’s S-VIDEO terminal with an
S-VIDEO cable A, instead of connecting with a video

cable.
Note that the connection with a video cable will be
ignored in case you connect a VCR to the receiver with

both video cable and S-VIDEO cable.

3 Connect the VCR’s VIDEO OUT (audio L/R

output) terminals and the receiver’s AUDIO

terminals (L/MONO and R) with an audio cable

• If the VCR’s audio output is in mono, connect the

VCR’s AUDIO OUT (audio output) terminal and the
receiver’s AUDIO L/MONO terminal with an audio

cable.

• To connect additional external devices, please see

“Connecting the external devices” on page 33.

2

1

2

1

R

A

VIDEO-1

VIDEO-2

VIDEO-3

R

R

Fig.A

Back of the receiver

O

IN

AUDIO

COMPONENT

R

L

R

L

AUDIO

VIDEO-1

VIDEO-2

VIDEO-3

VIDEO S-VIDEO

R

L/MONO

R

Pr

R-AUDIO-L

P

A

1

1

2

3

Fig.B

Back of the receiver

PD-42DV2_Eng.book Page 8 Friday, October 17, 2003 11:43 AM

Advertising
This manual is related to the following products: