JVC LCT1445-001A - Manual (Page 30)

FEATURES
28
PD-42DV2 (ASIA) / LCT1445-001A / English
ENGLISH
3 Press the Number buttons to enter the ID
number
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHANNEL GUARD
function”. After confirming the ID number, press the
b button to exit the menu.
• Even if you reset the lock temporarily, it does not
mean that the CHANNEL GUARD function set for
the TV channel is cancelled. The next time anyone
attempts to view the TV channel, it will be locked
again.
• When you would like to cancel the CHANNEL
GUARD function, you must perform the operation
“To set the CHANNEL GUARD function” again.
• To disable easy choosing of a Programme number
(PR) in which a locked TV channel has been
registered, the Programme number (PR) has been set
that it cannot be chosen by the 6 buttons or the
operation buttons at the TV.
• To disable easy resetting of the lock, “ID NO.” (ID
NO. input screen) is set so that it cannot appear unless
you press the h (Information) button.
REFRESH
When burn-in is minimal, burn-in and residual images may
be softened with the REFRESH function.
1 Choose REFRESH
2 Press the a a a a button
Snow appears on the screen. Leave the TV in this
condition for a few hours.
3 After a few hours, press the TV, number
buttons, or # # # # button
Press the A button for the TV.
The REFRESH function has no effect if used only for a
short time.
PICTURE SHIFT
The picture displayed on the screen is shifted up, down and
to the left and right at regular intervals. In order to prevent
burn-in, set this function to FAST or SLOW.
1 Choose PICTURE SHIFT
2 Press the 5 5 5 5 buttons to choose a mode
OFF:
PICTURE SHIFT is turned off.
SLOW:
The picture is shifted every 30 minutes.
FAST:
The picture is shifted every 10 minutes.
3 Press the a a a a button
The menu disappears
PD-42DV2_Eng.book Page 28 Friday, October 17, 2003 11:43 AM