Jabra A320s - Manual (Page 30)

From the COM Port shortcut menu select a communications port that
is not assigned to any otherservice.
3. Click OK.
To remove a Bluetooth Serial Port:
From the Bluetooth Configuration Panel, Local Services tab, select the
port to be removed and then clickDelete.
Note: The Delete button is only available when a Bluetooth Serial Port is selected.
Dial-up Networking Service
The Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth device to use
a modem that is physically connected to this computer. The remote device can then access the
Internet or log on to a remote network.
Configure the Dial-up Networking Service
From the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, select
Advanced Configuration > Local Services, and then double-click the Dial-up Networking service.
Select the physical modem to be used from the Modems - shortcut menu.
Set the common configuration properties of the service, and then click
OK.
Fax Service
The Fax service allows a remote Bluetooth device to send a Fax via a modem that is physically
attached to this computer.
Configure the Fax Service
From the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, select
Advanced Configuration > Local Services, and then double-click the Fax service.
Select the physical modem to be used from the Modems - shortcut menu.
Set the common configuration properties of the service, and then click
OK.
File Transfer Service
The File Transfer service allows this computer to perform file operations on the Bluetooth
exchange folder (and the folders and files it contains) of a remote device.
To Use the File Transfer Service
1. Right-click the Bluetooth icon and select Explore My Bluetooth Places.
©2005 All rights reserved.
30