Jabra A320s - Manual (Page 39)

You can specify BTW to report only specific devices, specific class(es) of device(s), or specific
type(s) of device(s) within a class. The discovered devices can be mixed-and-matched – you can
discover one or more specific devices, classes of devices, and types of devices within a class at
the same time.
To have BTW report only specific devices:
1. Open the Bluetooth Configuration Panel by right-clicking the Bluetooth Tray icon
on the Windows system tray. Select Advanced Configuration. The Bluetooth
Configuration Panel is displayed.
2. Click the Discovery tab.
3. Select Report only selected Bluetooth devices from the drop-down list.
4. Click the Add Device button. The Discoverable devices dialog box opens.
5. Select the device you want discovered and click OK.
Notes:
Multiple devices can be selected at the same time by holding the SHIFT or CTRL key
down as you select the devices.
The device(s) that you want to add to the list must be within radio range. Devices that
are not within radio range will NOT appear in the list of devices.
To report only a specific class of device:
1. Open the Bluetooth Configuration Panel by right-clicking the Bluetooth Tray icon on
the Windows system tray. Select Advanced Configuration. The Bluetooth
Configuration Panel is displayed.
2. Click the Discovery tab.
3. Select Report only selected Bluetooth devices from the drop-down list.
4. Click the Add Device button. The Discoverable devices dialog box opens.
5. Select Allow this computer to discover specific devices or types of devices
within a class.
6. From the Class drop-down list, select a class of devices to be discovered.
7. Click OK.
To report only a specific type of device within a class:
1. Follow steps 1 to 6 in the previous procedure (To report only a specific class of
device).
2. From the Type drop-down list, select the specific type of device to be reported.
3. Click OK.
To remove a device from the list of devices to be discovered:
1. Open the Bluetooth Configuration Panel by right-clicking the Bluetooth Tray icon on
the Windows system tray. Select Advanced Configuration. The Bluetooth
Configuration Panel is displayed.
2. Click the Discovery tab.
3. Select the device you want to remove.
©2005 All rights reserved.
39