John Deere AT-3401-J - Manual (Page 2)

2 Cut-Off Tool Operator's Manual
Congratulations on the purchase of your new cut-off tool! You can be assured your cut-off
tool was constructed and designed with quality and performance in mind. Each compo-
nent has been rigorously tested to ensure the highest level of acceptance.
John Deere Cut-Off Tool is designed to cut clamps, hangers, sheet metal, bolts, and will
cut up to 3/4" thick steel rods. John Deere Cut-Off Tool features a lock-off lever to prevent
accidental starts.
This operator's manual was compiled for your benefit. By reading and following the simple
safety, installation, operation, maintenance and troubleshooting steps described in this
manual, you will receive years of trouble-free operation from your new cut-off tool. The
contents of this manual are based on the latest product information available at the time of
publication. The manufacturer reserves the right to make changes in price, color, materi-
als, equipment, specifications or models at any time without notice.
Once the unit has been removed from the box, immediately write in the serial number of your
unit in the space provided below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim
with the transportation company immediately. Be sure that all damaged parts are replaced and
that the mechanical problems are corrected prior to operation of the unit. If you require service,
contact your Customer Service.
Mi-T-M ® Corporation, 8650 Enterprise Drive, Peosta, IA 52068
1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
1. Model Number
2. Serial Number
3. Date and Place of Purchase
Introduction