JVC Fashion Series RC-BM5 - Manual (Page 16)

13
Programmed playback of an audio CD
Up to 20 tracks can be programmed to play in any desired order.
1 Press the CD/RANDOM button to enter CD mode.
2 Press the PROGRAM button in stop mode.
Alternatively, press the PROGRAM/SET button on
the remote control unit.
The PROG. indicator and the current track number
start blinking in the display window.
3 Press the
4 or ¢ button to select a desired
track to be programmed.
Alternatively, use the number buttons on the remote
control unit.
STANDBY
CD POTABLE SYSTEM RC-BM5
3 1
3
6 6 1 2,4 3 2,4
4 Press the PROGRAM button.
“OK” is displayed and the PROG. indicator lights up
steadily.
5 Repeat steps 2 to 4 to program other tracks.
6 Press the 3/8 button to start programmed
playback.
To clear the program, press the
7 button in stop mode.
“PROG CLEARED” scrolls through the display
window. The program is also cleared when you open the
disc door.
To check the programmed tracks, press the
4 or
¢ button repeatedly in stop mode.
Each time you press the button, the program number and
track number are displayed in the display window.
Note:
You cannot program more than 20 tracks. “PRG FULL”
is displayed when you try to program the 21st track.
02_01-24_RCBM5_B_En.p65 6/12/02, 1:36 PM 13