JVC Fashion Series RC-BM5 - Manual (Page 17)

14
Programmed playback of an MP3 disc
Up to 99 tracks can be programmed to play in any desired order.
1 In stop mode, press the PROGRAM button.
Alternatively, press the PROGRAM/SET button on
the remote control unit.
The PROG. indicator starts blinking in the display
window.
2 Press the PRESET UP or PRESET DOWN button
to select a desired album.
Alternatively, press the GROUP UP or GROUP
DOWN button on the remote control unit.
3 Press the
4 or ¢ button to select a desired
track in the album.
Alternatively, use the number buttons on the remote
control unit.
4 Press the PROGRAM button.
“OK” is displayed for a moment and the PROG.
indicator lights up steadily.
5 Repeat steps 1 to 4 to program other tracks.
6 Press the
3/8 button to start programmed
playback.
To clear the program, press the
7 button in stop mode.
“PROG CLEAR” scrolls through the display window.
The program is also cleared when you open the disc door.
To check the programmed tracks, press the 4 or
¢ button repeatedly in stop mode.
Each time you press the button, the program number and
track number are displayed in the display window.
Note:
You cannot program more than 99 tracks. “PRG FULL”
is displayed when you try to program the 100th track.
02_01-24_RCBM5_B_En.p65 6/12/02, 1:36 PM 14