JVC LVT2095-001A - Manual (Page 13)

ENGLISH
13 OPERATIONS
Disc/USB operations
Stop playing and ejecting the disc
• “NO DISC” appears.
Press / SOURCE to listen to another playback
source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
[Hold]
Playing a file on USB device
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.
• You can also connect the iPod/iPhone to the USB terminal of the unit. For details of the operations, see page 21.
1 Turn on the power.
2 Connect a USB device.
All tracks will be played repeatedly until you change
the source or disconnect a device.
• You cannot connect a computer to the USB ( )
terminal of the unit.
Playing a disc
1 Turn on the power.
2 Insert a disc.
All tracks will be played repeatedly until you change the source or eject the
disc.
• If the ejected disc is not removed within 15 seconds, the disc is
automatically inserted again into the loading slot to protect it from dust.
Caution:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while “READING” is flashing on the display.
• Do not start the car engine if a USB device is connected.
• Stop playback before disconnecting a USB device.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• For more details about USB operations, see page 34.
KD-HDR60[J].indb 13 KD-HDR60[J].indb 13 09.11.24 11:21:58 AM 09.11.24 11:21:58 AM