Using the bluetooth devices, Using the bluetooth ® devices, Registering a bluetooth device – JVC LVT2095-001A User Manual

Page 15

Advertising
background image

ENGLISH

EXTERNAL DEVICES

15

For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
expansion port on the rear of this unit.
• Refer also to the instructions supplied with the

Bluetooth adapter and the Bluetooth device.

• See the last two pages to check the countries where

you may use the Bluetooth ® function.

• To check the latest information, visit the following

JVC web site: <http://www.jvc.co.jp/english/car/>
(English website only)

To use a Bluetooth device through the unit (“BT PHONE”
and “BT AUDIO”) for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
• Once the connection is established, it is registered in

the unit even if you reset your unit. Up to five devices
can be registered in total.

• Only one device can be connected at a time for each

source (“BT PHONE” and “BT AUDIO”).

Registering a Bluetooth device

Registration (Pairing) methods

Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT PHONE” or “BT AUDIO” as the source to

operate the Bluetooth menu.

OPEN

Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.

SEARCH

Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.

Using the Bluetooth ® devices

Registering using “OPEN”

Preparation: Operate the device to turn on its
Bluetooth function.

1

Select “BT PHONE” or “BT AUDIO.”

2

Select

“NEW

DEVICE.”

3

Select

“OPEN.”

4

Enter a PIN (Personal Identification Number)

code to the unit.
• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter

the specified PIN code to the unit.

1 Move to the next (or previous) number

position.

2 Select a number.

3 Repeat steps 1 and 2 until you finish

entering a PIN code.

4 Confirm the entry.

“OPEN..” flashes on the display.

[Turn]

See page 35 about warning messages for Bluetooth
operations.

Continued on the next page

KD-HDR60[J].indb 15

KD-HDR60[J].indb 15

09.11.24 11:22:00 AM

09.11.24 11:22:00 AM

Advertising