Recommended power 7 – JBL Professional JBL SR-X Speakers 981-00052-02 User Manual
Page 7
Recommended Power
7
Model
Full-Range / Parallel (1)
HF (2)
LF (3) / Discrete (4)
SR4702X
600W@8
Ω
100W@8
Ω
600W@8
Ω
SR4715X
1,200W@4
Ω
n/a
600W@8
Ω
x2
SR4718X
600W@4
Ω
n/a
n/a
SR4719X
1,200W@4
Ω
n/a
600W@8
Ω
x2
SR4722X
600W@8
Ω
60W@8
Ω
600W@8
Ω
SR4725X
600W@8
Ω
100W@8
Ω
600W@8
Ω
SR4726X
600W@8
Ω
150W@16
Ω
600W@8
Ω
SR4731X
1,200W@4
Ω
150W@16
Ω
1,200W@4
Ω
SR4732X
1,200W@4
Ω
150W@16
Ω
1,200W@4
Ω
SR4733X
1,200W@4
Ω
150W@16
Ω
1,200W@4
Ω
SR4735X
600W@8
Ω
100W@8
Ω
600W@8
Ω
1. Full-range / Parallel – Is the amplifier power required to optimally drive this speaker system when used in
full-range (passive) mode. In the case of dual-driver subwoofer models, this is the power required to drive
both transducers at the same time.
2. HF – Is the amplifier power required to optimally drive the high-frequency section of this speaker system
when used in bi-amp mode.
3. LF – Is the amplifier power required to optimally drive the low-frequency section of this speaker system
when used in bi-amp mode.
4. Discrete – Is the amplifier power required to optimally drive an individual transducer in a dual
transducer subwoofer.
5. ± 1 or ± 2 Pass-Thru - This allows for the convenience of a single conductor cable from the amplifier rack to
the speakers stack, this configuration supplies separate amplifier power to the subwoofer (ie ± 2) and to the
mid-high speaker (ie. ± 1 Pass-Thru).
The following table shows the recommended amplifier power for SR-X models. For applications in which
the ability to reproduce brief, high-power transients is important, an amplifier capable of up to twice the
power listed below may be used.