Sound adjustments, Turning on/off the loudness function, Adjusting the sound – JVC KS-FX210 User Manual

Page 11: Selecting preset sound modes, English

Advertising
background image

11

ENGLISH

KS-FX210 [EN] GET0052-001A [J]

Turning on/off the loudness
function

The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies to
produce a well-balanced sound at low volume levels.
Each time you press LOUD, the loudness function
turns on and off alternately.

LOUD

Selecting preset sound modes

You can select a preset sound adjustment suitable
to the music genre.
Each time you press SOUND, the sound mode
changes as follows:

SOUND

Indication

For

Preset values

BAS

TRE LOUD

SCM OFF

(Flat sound)

00

00

On

BEAT

Rock or disco music

+2

00

On

POP

Light music

+4

+1

Off

SOFT

Quiet background music +1

–3

Off

Notes:
• You can adjust the preset sound mode to your

preference, and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments” on
page 12.

• To adjust only the bass and treble reinforcement

levels to your preference, see “Adjusting the sound”
on page 11.

• When one of the sound modes is selected, it is shown

on the display as follows:

For example, when “POP” is selected.

|\

Adjusting the sound

You can adjust the sound characteristics to
your preference.

1

Select the item you want to adjust.

Each time you press the button,
the adjustable items change as
follows:

Indication

To do

Range

BAS

Adjust the bass

–6 (min.)

(Bass)

|
+6 (max.)

TRE

Adjust the treble

–6 (min.)

(Treble)

|
+6 (max.)

FAD*

Adjust the front

R6 (Rear only)

(Fader)*

and rear speaker

|

balance

F6 (Front only)

BAL

Adjust the left

L6 (Left only)

(Balance)

and right speaker

|

balance

R6 (Right only)

VOL

Adjust the volume

00 (min.)

(Volume)

|
50 (max.)

Note:

*

If you are using a two-speaker system, set the fader
level to “00”.

2

Adjust the level.

Note:
Normally the + and – buttons work as the volume
control buttons. So you do not have to select
“VOL” to adjust the volume level.

SOUND ADJUSTMENTS

LOUD

To increase the level.

To decrease the level.

(Bass)

(Treble)

(Fader)

(Balance)

(Volume)

LOUD

(BEAT)

(POP)

(SOFT)

EN11-12-KS-FX210[J]f

10/8/01, 10:15 AM

11

Advertising