Janome MEMORY CRAFT 4800 - Manual (Page 21)

20
• Needle threader
[1] Raise the needle to its highest position. Pull down the
needle threader knob as far as it will go.
[2] Push the knob in the direction of the arrow in the
illustration, inserting hook q into the needle eye.
Lead the thread around guide w and under the hook.
1 Hook
2 Guide
[3] Holding on to the thread firmly with your right hand,
pull the needle threader knob in the direction of the
arrow in the illustration, and then upwards to pull the
thread through the eye of the needle.
[4] Pull the thread through the needle eye.
The needle threader can be used with a #11 to #16
needle or #11 Blue tip needle.
Thread size 50 to 100 should work well.
[1]
[2]
[3]
[4]
1
2