JVC 0701MNV*ID*PJ - Manual (Page 23)

EN
23
Super VHS ET
Your recorder is equipped with Super VHS ET that makes it
possible to record with S-VHS picture quality on VHS cassettes.
NOTES:
● The "S-VHS" indicator lights on the front display panel when
"S-VHS ET" is set to "ON" .
● You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
੬
pg.
21) is in progress.
...while B.E.S.T. (
੬
pg. 24) is in progress.
...when the recorder's power is off.
● S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded in
S-VHS ET on a recorder equipped with S-VHS ET.
NOTES:
● To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
● You can play back S-VHS ET recordings not only on this
recorder but also on another VHS recorder equipped with
S-VHS ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from regular
VHS recordings.
● S-VHS ET recordings can also be played back on an S-VHS
recorder or a VHS recorder equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be cases
where S-VHS ET playback is not possible on a particular
recorder.
● Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
● With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
● High Grade tapes are recommended for superior results.
● Make sure that "B.E.S.T." is set to "ON" (
੬
pg. 24).
● During S-VHS ET playback, noise may appear depending
on tape quality.
● Noise may appear during search, still, frame-by-frame and
slow-motion playback.
● If the playback picture becomes blurred or interrupted, use
a cleaning cassette.
PUSH JOG
OK
MENU
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG %fi to
place the pointer next to
"FUNCTION SET", then
press OK or PUSH JOG
#
.
SELECT S-VHS ET MODE
3
Press PUSH JOG %fi to
place the pointer next to
"S-VHS ET", then press OK
or PUSH JOG
#
to select
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
PROGRAMME NAVIGATION
FUNCTION SET
TUNER SET
INITIAL SET
[ 5/∞] =
[MENU] : EXIT
PREVIOUS PAGE
PROG. NAVIGATION
ON
AUTO SP =LP TIMER OFF
VIDEO STABILIZER ON
S-VHS ON
S-VHS ET ON
[ 5/∞] =
[MENU] : EXIT