JVC 0701MNV*ID*PJ - Manual (Page 32)

32
EN
24H Express
Timer
Programming
JOG
ACCESS 24HR EXPRESS
TIMER PROGRAMME
DISPLAY
1
Push 24H EXPRESS ‰ ‰ ‰ ‰ ‰ . “ ” and start time start blinking
on the display panel.
SET PROGRAMME START
TIME
2
Turn the JOG dial to the left or right. Then, push the
JOG dial. “
” and start time start blinking on the
display panel.
● One click stop of the JOG dial changes the time in 5-
minute intervals.
SET PROGRAMME STOP
TIME
3
Turn the JOG dial to the left or right. Then, push the
JOG dial and channel number will start blinking.
●
One click stop of the JOG dial changes the time in 5-
minute intervals.
You can programme a timer recording that starts within
24␣ hours.
Programme start time indicator
Programme start time indicator
Programme stop time indicator
24H EXPRESS
TIMER RECORDING (cont.)
Remember, the clock must be set before you can
programme the timer (
੬
pg. 12).
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Select the appropriate colour system ( ੬
pg. 52).