Specifications, General, Lcd panel – JVC DT-V24G1 User Manual

Page 26: Input/output terminals, 7 general, 7 input/output terminals, 7 lcd panel

Advertising
background image

26

• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,

and may be slightly different from actual products.

• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and

may be the trademarks or registered trademarks of their respective companies.

Specifications

Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

7 General

Model name

DT-V24G1

DT-V20L3G

Type

Multi format LCD monitor

Screen size

Type 24 wide format

Type 20 wide format

Aspect ratio

16:10

Horizontal/vertical frequency
(computer signal)

H: 31.469 kHz – 75.000 kHz
V: 48 Hz – 65 Hz

* Some signals within this frequency range may not be displayed (“Out of

range” is displayed).

Compliant video signal format

☞ “Available signals” on page 10

Format

3G SDI: SMPTE424M/SMPTE425M
DUAL LINK HD SDI:
SMPTE372M
HD SDI: BTA S-004C, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M:

525

EMBEDDED AUDIO:
SMPTE299M,

SMPTE272M

Audio output

Internal speaker: 1.0 W + 1.0 W

Operating conditions

Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)

Power requirements

AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz

Rated current

1.15 A (AC 120 V)
0.67 A (AC 220 – 240 V)

1.00 A (AC 120 V)
0.60 A (AC 220 – 240 V)

External dimensions
(excluding protruding parts)

Width:
564 mm (22 1/4˝) 564 mm (22 1/4˝)
Height:
448.6 mm (17 3/4˝) 408 mm (16 1/8˝)
Depth:
243 mm (9 5/8˝)

99 mm (4˝)

(with the stand)

(without the stand)

Width:
477 mm (18 7/8˝) 477 mm (18 7/8˝)
Height:
394.6 mm (15 5/8˝) 354 mm (14˝)
Depth:
243 mm (9 5/8˝)

99 mm (4˝)

(with the stand)

(without the stand)

Weight

11.6 k

g (25.5 lbs) (with the stand)

8.7 k

g (19.1 lbs) (without the stand)

10.6 k

g (23.3 lbs) (with the stand)

7.7 k

g (16.9 lbs) (without the stand)

Accessories

AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)

7 Input/output terminals

Model name

DT-V24G1

DT-V20L3D

Video

VIDEO (INPUT 1)

Input/output of composite signal:

2 line, BNC connector x 4,

1

V(p-p),

75

Ω

VIDEO (INPUT 2)

* The input (IN) and output (OUT) terminals are bridge-

connected (auto termination).

DVI-D (HDCP)

DVI-D signal input (compatible with HDCP):

DVI-D connector x 1 (compatible with DDC2B)

COMPO./RGB (G/Y, B/P

B

/B-Y,

R/P

R

/R-Y)

Input/output of analog component signal/analog RGB signal:

1 line, BNC connector x 6

G/Y: 1 V(p-p), 75

Ω (including sync signal)

B/P

B

/B-Y, R/P

R

/R-Y: 0.7 V(p-p), 75

Ω

* The input (IN) and output (OUT) terminals are bridge-

connected (auto termination).

EXT.SYNC (CS)

Input/output of composite sync signal:

1 line, BNC connector x 2,

0.3 V(p-p) – 4 V(p-p),

75

Ω (tri-level sync, negative polarity sync (bi-level), and BB)

(including no video signal)
* The input (IN) and output (OUT) terminals are bridge-

connected (auto termination).

E. AUDIO HD/SD SDI (IN 1)

Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):

auto detection, 2 line, BNC connector x 2

E. AUDIO HD/SD SDI (IN 2)

E. AUDIO HD/SD SDI
(SWITCHED OUT)

Digital signal output (compatible with EMBEDDED AUDIO signals):

1 line switched out, BNC connector x 1

A

udio

AUDIO ASSIGN (IN 1)

Analog audio signal input:

2 line, RCA connector x 4,

500 mV (rms), high impedance

AUDIO ASSIGN (IN 2)

AUDIO ASSIGN
(MONITOR OUT)

Analog audio signal output:

1 line, RCA connector x 2,

500

mV

(rms)

External

contr

ol

REMOTE (MAKE/TRIGGER)

☞ “Using the MAKE/TRIGGER system” on page 20

REMOTE (RS-485)

☞ “Using the serial communication” on page 22

REMOTE (RS-232C)

7 LCD panel

Model name

DT-V24G1

DT-V20L3G

Type

24˝ wide, active matrix TFT

20˝ wide, active matrix TFT

Effective screen size

Width:

518.4 mm (20 1/2˝)

Height:

324 mm (12 7/8˝)

Width:

433.4 mm (17 1/8˝)

Height:

270.9 mm (10 3/4˝)

Number of pixels displayed

1 920 x 1 200

1 680 x 1 050

Number of colors displayed

16.77 million

Viewing angle (TYP.)

178° (Horizontally), 178° (Vertically)

178° (Horizontally), 178° (Vertically)

Brightness (TYP.)

400 cd/m

2

470 cd/m

2

Contrast ratio (TYP.)

1000:1

700:1

DT-V24G1_20L3G_EN.indd 26

DT-V24G1_20L3G_EN.indd 26

10.1.15 3:22:29 PM

10.1.15 3:22:29 PM

Advertising
This manual is related to the following products: