JVC DLA-G10E - Manual (Page 12)

12
English
Drop prevention fixture
Ceiling mount
Pin
L-plate
Vertical angle
adjustment screw
M5
✕ 15 screws (4)
M5 ✕ 15 screws
(4)
MOUNTING THE PROJECTOR ON THE CEILING MOUNT
1
Engage the L-plate on the pin of the ceiling mount.
2
Fasten temporarily with the vertical angle adjustment screws (4) which were removed. After fastening with the vertical
adjustment angle screws (4), perform the adjustments described on page 13.
Screwdriver
Prepare the following tool
Accessories to remove from
the projector
Completion drawing