Juniper Networks ERX-710 User Manual
About this guide
About This Guide
This E-Series Installation and User Guide provides the information you
need to install and start the E-series router.
Note: If the information in the latest E-series Release Notes differs from the
information in this guide, follow the E-series Release Notes.
The E-series router is shipped with the latest system software installed. If
you need to install a future release or reinstall the system software, refer
to the procedures in Appendix B, Installing JUNOSe Software.
E-Series Routers
Five models of E-series routers are available:
•
ERX-1440 router
•
ERX-1410 router
•
ERX-710 router
•
ERX-705 router
•
ERX-310 router
All models use the same software. For information about the differences
between the models, see Chapter 1, E-Series Overview.
In the E-series documentation, the term ERX-14xx models refers to both
the ERX-1440 router and the ERX-1410 router. Similarly, the term
ERX-7xx models refers to both the ERX-710 router and the ERX-705
router. The terms ERX-1440 router, ERX-1410 router, ERX-710 router,
ERX-705 router, and ERX-310 router refer to the specific models.