JVC GR-D22 - Manual (Page 25)

EN
25
12
12 : 34 : 24
0
3 0 ’ 5 2
3
: 5
b i t / SOU
M P
C E D
ND1 8 3
L
USING MENUS FOR DETAILED ADJUSTMENT
ON SCREEN setting:
For playback sound,
tape speed and tape
running.
DATE/TIME setting:
For date/time.
Display
Minutes
Seconds
Frames*
* 30 frames = 1 second
TIME CODE setting:
For time code.
Playback Sound
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany
your playback picture. According to the menu access
explanation on pg. 24, select “SOUND MODE” or “12bit
MODE” from the Menu Screen and set it to the desired
parameter.
SOUND MODE
[STEREO ]: Sound is output on both “L” and “R”
channels in stereo.
SOUND L : Sound from the “L” channel is output.
SOUND R : Sound from the “R” channel is output.
12bit MODE
MIX: Original and dubbed sounds are combined and
output in stereo on both “L” and “R” channels.
[SOUND 1]: Original sound is output on both “L” and
“R” channels in stereo.
SOUND 2: Dubbed sound is output on both “L” and
“R” channels in stereo.
NOTES:
• The camcorder cannot detect the sound mode in which
the recording was made during fast-forward or rewind.
During playback the sound mode is displayed in the upper
left corner.
• The “SOUND MODE” setting is available for both 12-bit
and 16-bit sound. (In previous models’ functions, “12-bit”
is called “32 kHz” and “16-bit” is called “48 kHz”.)
[ ] = Factory-preset
GR-D22_16-28_EN 29/9/03, 5:04 PM 25