Janome MEMORYCRAFT 300E - Manual (Page 37)

36
PC Card Designs
Inserting and Ejecting the PC Card
Insert the PC card into the slot with the front side facing
to you.
Push the card until it clicks, then the eject button pops
out.
1 PC card
2 Eject button
NOTE:
When the card is properly set, the red bar on the eject
button will show up.
Ejecting the PC card
Press the Eject Button to eject the PC card.
Take out the PC card from the machine.
NOTE:
When the power is turned on with aPC card inserted in
the machine, it will take sometime to get the machine
booted up.
Selecting the PC card designs
Press the PC card key. The designs contained in the
card are displayed on the pattern selection keys.
Press the pattern selection key to select the design you
wish to sew.
The selected design and its color parts will be shown in
their sewing order.
CAUTION:
Do not turn the power off or eject the card while the
warning sign or hourglass has been displayed.
Edit
Mode
PC Card NO.1001
Hoop Size Hoop Size A(F):126x1 A(F):126x110mm 10mm
2 1 3 4
A Z
2
1
2