Jwin JT P531 - Manual (Page 10)

Caller ID Speaker Phone V10M10_IM_EN_03232007
www.jWIN.com - 9 -
GETTING STARTED
Connecting the Stand for Flat Surface Placement-continued
4. There are four (4) slots. The top two
(2) slots are situated closer together
and are on the bottom surface of the
unit. The bottom two (2) slots are
situated further apart and are
located in indented rectangular
sections which are cut into the
bottom surface.
5. Line up the top two lips on the stand with the top two (2) slots on the bottom
of the unit and place the lips into the slots.
6. Using your thumbs, gently press the stand just above the bottom two (2)
lips until the stand clicks into position.
7. Return the phone to the upright position.
Click!