Jwin JT P531 - Manual (Page 17)

Caller ID Speaker Phone V10M10_IM_EN_03232007
www.jWIN.com - 16 -
OPERATIONAL INSTRUCTIONS
Calling a Number from the Caller ID List
1. With the handset is on the hook, press [ ▲ ] or [ ▼ ] to find the number you
wish to call.
2. Press [DIAL] once; the LCD will display
“PICK UP OR ADJ,” (for a 10 digit
number) or “PICK UP PHONE.” (for a 7
or 11 digit number).
3. Pick up the handset and the number on
the display will automatically dial.
4. With the handset off the hook, press [ ▲ ]
or [ ▼ ] to find the number you wish to
call.
5. Press [DIAL] once. For 7 and 11 digit
numbers, the number will automatically
dial. For 10 digit numbers, the phone
will add the number “1” automatically as
the first digit.
Storing One-Touch Memory
1. While the handset is on the hook, press
[M1] or [M2].
2. The LCD will show “E1” or “E2.”
3. Press
[STORE] to enter.
4. Input the number you wish to save.
5. Press
[STORE] again to confirm.
Note: Press [DEL] to cancel the current number
while entering.
Dialing from One-Touch Memory
1. Pick up the handset or press [SPEAKER].
2. Press
[M1] or [M2] to dial the number automatically.
Storing Two-Touch Memory
1. While the handset is on the hook, press [STORE].
2. The LCD will display “M0-M9”
3. Select and press the number from the
keypad 0-9
4. Press [STORE] to enter
5. Input the desired telephone number
6. Press
[STORE] to confirm and
advance to Name Input mode.
7. Input the name using the letters on the
phone keypad (For example, to enter
the letter “C,” press the number 2 three times).
8. Press [STORE] again to confirm.
Note: Press [DEL] to cancel the current number or name while entering.