Jettech Metal Products F18-DP - Manual (Page 25)

25
When the Start Cycle TC (6-20519) button is depressed. The small contactor relay (20067) is
energized and closes contacts CR1 and CR2. This has two purposes. The first one is to energize both
the timer motor and the indicator light LC (7). The second purpose is for CR2 to bypass the Start
Switch TC.
The timer motor MT is energized and starts to turn and closes the first contact M1 which will bypass
the small relay contactor and keep the timer motor running during the entire cycle.
1 888 275 4538 - 611
514 737 9701 - 611
FAX 514 737 2792