John Deere GREENSTAR BZ100157 - Manual (Page 16)

Installation Instructions
OUZXMAG,0001BEF –19–13NOV03–2/3
ZX1034541
–UN–18NOV03
ZX1031222
–UN–02NOV02
A—Cutterhead frame
B—75 mm (2.95 in.)
C—34 mm (1.34 in.)
D—Plate Z73362
E—Cap screws M8x40
F—15 mm (0.59 in.)
Install Lower Plate Z73362
1. Drill two 9 mm (0.35 in.) diameter holes on cutterhead
frame (A) as shown.
2. Install plate Z73362 (D) on frame (A) with two cap
screws M8x40 (E) and nuts, as shown.
Continued on next page
Z103757 (13DEC06)
14
Installation Instructions
011507
PN=16