John Deere GREENSTAR BZ100157 - Manual (Page 19)

Installation Instructions
OUCC002,00021CA –19–18NOV06–2/8
X30 Connector AZ71569 Pin Connections
Pin Number Wire
Pin #1 .......................................... 584
Pin #2 .......................................... 586
Pin #3 .......................................... 585
Pin #4 .......................................... 571
Pin #5 .......................................... not used
Pin #6 .......................................... not used
OUCC002,00021CA –19–18NOV06–3/8
ZX1037470
–UN–13SEP05
ZX1037471
–UN–13SEP05
A—Fuse
B—Connecting point
C—Wiring harness AZ101120
D—Guide plate
5. Connect part of wiring harness AZ101120 with
15A-fuse (A) to connecting point 002 (B) located on
board A3 as shown.
6. Remove closing plate from bottom of load center (not
illustrated) and pass wiring harness AZ101120 (C)
through the opening until guide plate (D) can be
installed using original hardware previously removed.
Continued on next page
Z103757 (13DEC06)
17
Installation Instructions
011507
PN=19