JVC 0397MKV*UN*SN - Manual (Page 62)

62
EN
ADVANCED OPERATIONS
Changing ID number
The device's ID number is preset at factory as follows:
ex. Camcorder: 06 or 07 Video printer: 20
When connecting more than two same type devices, the same ID numbers will exist and a
malfunction can occur. To avoid a malfunction, change the ID numbers.
It is recommended to change the ID number of an already connected device before connect-
ing the same type device.
1 ACCESS "ID CHANGE" DIALOG
BOX
Choose "ID Change" from "File" on the
MOVIE PLAYER window.
•The "ID Change" dialog box appears.
2 SELECT DEVICE
Click on the name of the device and
"CHANGE".
•The dialog box to enter new ID number
appears.
3 ENTER NEW ID NUMBER
4 SET ID NUMBER
Click "OK".
•The message "The device ID will be
changed." appears.
Clicking "OK" again sets that ID
number and brings up the MOVIE
PLAYER window.
NOTES:
● After step 4, perform the following
‘Connecting other device during operation’.
● Do not enter ID number "0" because "JLIP
Player Software" does not recognize "ID 0".
1 INITIALIZE
Choose "Initialize" from "File" on the MOVIE PLAYER window.
Connecting other device during operation
When connecting an other device during operation or changing ID numbers, initializing is
necessary to confirm the connected devices. (Not necessary to run "JLIP Player Software" from
beginning again.)
ID Change
Select the device to change.
06:VCRCAMERA
VCR
VIDEO PRINTER
CHANGE
CHANGE
CLOSE
ID Change
CANCEL OK
06 ID
=
Enter a number between 1 and 99.