JVC GV-HT1U - Manual (Page 20)

20
EN
INSTALLATION OF INK CASSETTE
Installing the Ink cassette
Before printing, load printing paper and ink kit as shown below.
1 OPENING INK CASSETTE COM-
PARTMENT LID
•To open the ink cassette compartment lid,
slide it in the direction of the arrow as far as
it will go.
2 REMOVING SLACK IN THE INK
RIBBON, IF ANY
•Insert a ball-point pen or the like and rotate
the roller in the indicated direction.
3 INSTALLING INK CASSETTE
•Hold the side with model label face up and
slide in the ink cassette as far as it will go.
4 CLOSE THE INK CASSETTE COM-
PARTMENT LID
CAUTION:
Do not touch the inside of the ink cassette
compartment to avoid burns and other injuries.
When removing ink cassette
•Grasp the knob at the center of the ink cassette and
pull it towards you.
1, 4
2
3
INK