JVC GV-HT1U - Manual (Page 35)

EN
35
Print Operations
5 SET THE VIDEO SOURCE TO PLAY-
BACK MODE
•For details, refer to the instruction manual
supplied with the video source.
6 PRESS THE MEMORY BUTTON
WHEN THE IMAGE YOU WISH TO
PRINT APPEARS
•This action stores the image you wish to print.
•The message, “Please wait ...” is displayed
on the LCD panel while the image is being
stored.
•The memory icon indicates the
following conditions.
on: image data has been stored in the printer
off: no image data is stored in the printer
7 PRESS THE PRINT BUTTON
•The printer starts printing the stored image.
•The message, “Please wait ...” is displayed
on the LCD panel. Then the printer icon
appears.
•The printer icon indicates the
following conditions.
on: image data is being printed
off: printing has been completed
•The image is printed using the selected
special effect.
NOTES:
•To print the same image again, press the
PRINT button. One print is made each time
the PRINT button is pressed.
•To print a different image, perform operations
in steps 5 to 7.
•The settings cannot be changed when printing
is completed. To change settings, store an
image into a memory again.
,,,,,,
,,,,,
,,,,,
,,,,,
,,,,,
,,,,,
,,,,,
MEMORY
SELECT
PRINT
SET
MENU
MEMORY
SELECT
PRINT
SET
MENU