Operation, Warm water washing, Water flow/pressure adjustment – Jacuzzi Personal Hygiene System EV77959 User Manual

Page 6: Pulsating water mode, Warm air dryer, Adjusting seat temperature, Adjusting water temperature, Adjusting dryer temperature

Advertising
background image

Operation

5

Some features of the Refresh Personal Hygiene System™ are designed to function only when the seat is occupied.

Using the Refresh Remote Control

Adjusting Seat, Water, and Dryer Temperature

Warm Water Washing

Sit on the seat and press the FRONT or BACK (either HIM or HER) button to begin water
flow. Press STOP button to discontinue water flow.

Water Flow/Pressure Adjustment

While water is flowing, press the button to increase pressure or the
button to decrease pressure. Repeat until desired pressure is reached. There
are five (5) levels of water pressure. Each wider bar on the LCD graphic
display represents one level increase.

Pulsating Water Mode

To change to Pulsating Mode; While water is flowing, press the FRONT or BACK (either HIM or HER) button for over
three (3) seconds. To deactivate and return to normal washing mode, repeat the above step.

Warm Air Dryer

Press the WARM AIR button to start dryer. Press STOP to stop the dryer.

LCD Panel

Adjusting Seat Temperature

Press SEAT TEMP button to adjust temperature. Repeat until desired level is achieved. There are
four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display
represents one level increase. No LCD graphic indicates seat heating is OFF.

Adjusting Water Temperature

Press WATER TEMP button to adjust temperature. Repeat until desired level is achieved. There are
four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display
represents one level increase. No LCD graphic indicates water heating is OFF.

Adjusting Dryer Temperature

Press WARM AIR button to adjust temperature. Repeat until desired level is achieved. There are three
(3) temperature levels: low>medium>high. Each wider bar on the LCD graphic display represents
one level increase.

You must be sitting on the seat for these functions. The last entered temperature settings are stored in memory.

AUXILIARY CONTROLS

(backup for Remote)

AUX Stop

AUX Wash

REMOTE CONTROL PANEL

WARM WATER WASH

Posterior (Rear)

Cleansing

Feminine (Vaginal)

Cleansing

Water Temperature
Low>Med>High>Off

Seat Temperature
Low>Med>High>Off

Warm Air Dryer

On

Low>Med>High

Water Pressure

Adjustment

Decrease

Increase

Stop

(for Wash and Dryer)

Powersave

Function

LCD Panel

INDICATOR LIGHTS

power

power save

seat heat

seat sensor

View of

LCD Panel

EX93000 Refresh Installation Manual 10/06

Advertising