For recording, Programme ae with special effects, Night-scope – JVC GR-DVL610SH User Manual

Page 38

Advertising
background image

38

EN

I C F I LM

CLASS

SEP I A

GHT

TW I L I

ONE

MONOT

SNOW

S

SPORT

G

I HT

SPOT L

E

STROB

4

SL

X

OW

10

SL

X

OW

ER

SHUT T

1/120

FOR RECORDING

NIGHT-SCOPE Button

Power Switch

IMPORTANT:
Some modes of Programme AE with special effects
cannot be used with certain Fade/Wipe Effects
(

pg. 40, 41). If an unusable mode is selected, its

indicator blinks or goes out.

Lock Button

P.AE Button

Programme AE With Special Effects

1

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

2

Press the MENU/BRIGHT wheel in. The Menu
Screen appears.

3

Rotate the MENU/BRIGHT wheel to select “
PROGRAM AE”, then press it.

4

Rotate the MENU/BRIGHT wheel to select the
desired mode (

pg. 39), then press it. Selection is

complete. Press the MENU/BRIGHT wheel in again.
The Menu Screen closes.

5

Press P.AE so that the selected effect indicator
appears.

To Deactivate The Selected Mode . . .

.... press P.AE again so that the effect indicator disappears.

NOTES:

● Programme AE with special effects can be changed

during recording or during Record-Standby.

● Some modes of Programme AE special effects cannot be

used during Night-Scope.

MENU/BRIGHT Wheel

Display

Night-Scope

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is strobing
due to the slow shutter speed.

1

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

2

Press NIGHT-SCOPE so that the Night-Scope
indicator “

”appears.

•The shutter speed is automatically adjusted to

provide up to 30 times sensitivity.

•“A” appears beside “

” while the shutter speed is

being automatically adjusted.

To Deactivate Night-Scope . . .

.... press NIGHT-SCOPE again so that the Night-Scope

indicator disappears.

GR-DVL810A/DVL710A/
DVL610A/DVL610SH only

NOTES:

● During Night-Scope, the following functions

or settings cannot be activated and its
indicator blinks or goes out:

Some modes of “Programme AE With
Special Effects” (

pg. 38, 39), “Picture

Wipe/Dissolve” (

pg. 40, 41).

“GAIN UP” in the CAMERA Menu
(

pg. 47).

“DIS” in the MANUAL Menu (

pg. 47).

“Video light” when LIGHT OFF/AUTO/ON
is set to “AUTO” (

pg. 19).

● During Night-Scope, it may be difficult to

bring the camcorder into focus. To prevent
this, use of a tripod is recommended.

Advertising