JVC 0610TMH-MW-ST - Manual (Page 19)

19
English
Basic Operations
Has three functions.
Return – Returns to the channel viewed
just before the channel currently
onscreen.
Return+ – Lets you program a specific channel
to return to while scanning through the
channels using the + CH – buttons.
TV – Returns to the TV mode when you are
watching a video, DVD, etc.
Note:
•
Press the TUNE and RETURN+ buttons. This
will memorize the current channel to return to
while you scan through the other channels.
To cancel, press the TUNE and RETURN+
buttons again.
Allows you to set the TV to turn on at a specific
time to a channel of your choice and turn off
automatically after a set amount of time.
On Timer / Input / Sleep Timer
0 h 0 m
0 - 0
0 min
Timer
On Timer
Input
Sleep Timer
Notes:
•
If you set the interval of On Timer using the
2 3 buttons, select the channel at input and
press the OK button.
• After you set On Timer and turn off the TV,
the power lamp lights.
• You can check the remaining time of On
Timer by displaying this menu again.
• You can set the interval of Sleep Timer using
the
2 3 buttons.
• 60 seconds before the TV turns off, a
message will appear and it will count down
the remaining time.
• See page 52, “On Timer using iPod”.
EN_LT32P510.indb 19 EN_LT32P510.indb 19 10.6.1 6:01:21 PM 10.6.1 6:01:21 PM