JVC DVL320U User Manual
Page 28
2-12
Fig. 2-4-13
9. 9a Loading guide/ 9b Timing belt
9c Center gear assembly/ 9d Motor bracket assembly
9e Worm wheel/ 9f Gear holder
Note 9a:
Carefully handle the DEW sensor. (Don’t touch the sensor
surface in particular.)
Note 9b:
When engaging the timing belt, make sure that it securely
engages with the gears of both the center gear assembly and
reel drive pulley assembly.
Fig. 2-4-14
10. 10a Main cam gear/ 10b Brake control plate
10c Rotary encoder/ 10d Connect gear
10e Reel drive pulley assembly
Note 10a:
When removing/refitting parts, pay careful attention to the
flexible board and so on not to damage them.
Note 10b:
When reinstalling the main cam gear and the brake control plate,
first fit them together so that the protrusion on the brake control
plate is set in the slot on the main cam gear as shown below,
next install the two together to the main deck assembly.
9f
(W9)
15
(S9)
14
(S9)
Note 9a
Note 9b
13
(S9)
12
(S9)
9c
9b
9d
9e
9a
10a
(W10a)
(W10a)
17
(S10)
16
(S10)
Note
10b
Note 10a
(L10)
(W10b)
10b
10c
10d
10e
Note 10b
10a
10b