JVC DVL320U - Manual (Page 32)

2-16
2.6 MECHANISM ADJUSTMENTS
2.6.1 Assembling slide deck assembly and main deck assembly
Fig. 2-6-1
Assembling procedure
1. Loosen the screw A.
2. Set the mechanism in the PLAY mode.
(Refer to “2.3.2 Explanation of mechanism mode”.)
3. Press the end face B of the slide deck assembly (reel
disk side) and the end face C of the main deck assem-
bly (drum assembly side) with uniform force so that the
two assemblies are tightly pressed to each other. Further-
more, press the part
D and tighten the screw A.
Note : Tightening torque for screw A: 0.069 N·m (0.7 kgf·cm)
3
2
3
3
1
3
3
C C
D
A
B B
œ
Œ